Composite Membranes Using Hydrophilized Porous Substrates

PDF Publication Title:

Composite Membranes Using Hydrophilized Porous Substrates ( composite-membranes-using-hydrophilized-porous-substrates )

Next Page View | Return to Search List

Text from PDF Page: 001

energies Article Composite Membranes Using Hydrophilized Porous Substrates for Hydrogen Based Energy Conversion Seohee Lim and Jin-Soo Park * Department of Green Chemical Engineering, College of Engineering, Sangmyung University, Cheonan 31066, Korea; * Correspondence:; Tel.: +82-41-550-5315 Received: 20 October 2020; Accepted: 19 November 2020; Published: 21 November 2020 􏰁􏰂􏰃 􏰅􏰆􏰇 􏰈􏰉􏰊􏰋􏰌􏰂􏰍 Abstract: Poly(tetrafluoroethylene) (PTFE) porous substrate-reinforced composite membranes for energy conversion technologies are prepared and characterized. In particular, we develop a new hydrophilic treatment method by in-situ biomimetic silicification for PTFE substrates having high porosity (60–80%) since it is difficult to impregnate ionomer into strongly hydrophobic PTFE porous substrates for the preparation of composite membranes. The thinner substrate having ~5 μm treated by the gallic acid/(3-trimethoxysilylpropyl)diethylenetriamine solution with the incubation time of 30 min shows the best hydrophilic treatment result in terms of contact angle. In addition, the composite membranes using the porous substrates show the highest proton conductivity and the lowest water uptake and swelling ratio. Membrane-electrode assemblies (MEAs) using the composite membranes (thinner and lower proton conductivity) and Nafion 212 (thicker and higher proton conductivity), which have similar areal resistance, are compared in I–V polarization curves. The I–V polarization curves of two MEAs in activation and Ohmic region are very identical. However, higher mass transport limitation is observed for Nafion 212 since the composite membrane with less thickness than Nafion 212 would result in higher back diffusion of water and mitigate cathode flooding. Keywords: composite membrane; perfluorinated sulfonic acid; ionomer; electrolyte; fuel cell 1. Introduction The unstable crude oil prices and global warming caused by greenhouse gases drive us to use alternative energy sources. Companies and governments have made substantial investments in new and renewable energy over the past few years [1]. Among the new and renewable energy, hydrogen had begun to be translated into the alternative energy source area due to easy deployment into electricity infrastructure, diversified energy sources to produce hydrogen from fossil fuels to biomass, improvement of local air pollution, and recent matured technologies such as fuel cells and electrolyzers [2,3]. Using the electrochemistry-driven energy conversion technologies, hydrogen could be produced from water by using electricity and could be consumed to convert into the water along with generating electricity (H2 + O2 ↔ H2O) [4–6]. Fuel cells are the most promising technology utilizing hydrogen. Proton exchange membrane fuel cells (PEMFCs) using hydrogen as fuel show high efficiency during the direct conversion of chemical energy to electric energy. In addition, there is no greenhouse gas emission when hydrogen is produced by water electrolysis using electricity supplied from renewable energy sources such as wind, solar, biomass, etc. [1,7]. Nevertheless, the installation cost is still higher than conventional energy conversion technology such as internal combustion engine and the technical level of durability and reliability must be raised to a higher level to enter the full-fledged fuel cell market [8–10]. Membrane-electrodeassembly (MEA) is a key component in PEMFCs, which consists of a piece of proton exchange membrane (PEM) sandwiched between two catalyst layers as an electrode [11]. Energies 2020, 13, 6101; doi:10.3390/en13226101

PDF Image | Composite Membranes Using Hydrophilized Porous Substrates

PDF Search Title:

Composite Membranes Using Hydrophilized Porous Substrates

Original File Name Searched:


DIY PDF Search: Google It | Yahoo | Bing

SeaMerlin The SeaMerlin Engine is a water based gas leverage turbine for marine propulsion, seawater distillation, oceanwater CO2 harvesting, and more.

About: More about Infinity Turbine and the quest for the Xprize... More Info

Strategy and Consulting Services: Renewable energy strategy, Organic Rankine Cycle, CO2 energy, and Sonification technology consulting... More Info

@elonmusk XPrize $100 million CO2 Challenge: Carbon Removal Prize Challenge Sponsored by Elon Musk... More Info

CO2 Phase Change Demonstrator: Experiment with gas to liquids (CO2 to alcohol) using Nafion and our phase change demonstrator cart (we can ship worldwide)... More Info

CO2 GTL Gas to Liquids Experimental Platform: Experiment with gas to liquids (CO2 to alcohol) using Nafion (electrolyzer membrane) and our phase change demonstrator cart (we can ship worldwide). CO2 goes supercritical at 31 C. This is a experimental platform which you can use to demonstrate phase change with low heat. Includes integration area for small CO2 turbine, static generator, Nafion pellets, Nafion membrate, or Nafion tubes... More Info

Concept: The concept of the SeaMerlin Engine is to convert or supplement existing marine vessel propulsion to a gas leverage turbine which scavenges CO2 from saltwater at the same time it provides vessel thrust.

CONTACT TEL: 608-238-6001 Email: (Standard Web Page)